Controlling your World the Easy Way

basic_mark, Thanks for your second reply and alternate program. Sorry it took me a "while" to get back to you. In a good/bad sort of way, I am glad that I was not crazy and WHILE didn't work for you either. Bad, Daniel has more work. I did end up using repeat/until as a replacement on the ...

First, basic_mark thanks for answering. I see that I did not make the problem clear. The test program as shown, never prints the 20! The single step print out was to show that when the WEND is executed (line 5) the program jumps back to WHILE (line 3). The program never goes past the WEND! I am havi...

I seem to be having a problem using While/Wend,here is an example. Also see the single step printout that follows the program. Thanks your help, jerry Program Counter = 0 ' Initialize variable. WHILE Counter < 20 ' Test value of Counter. Counter = Counter + 1 ' Increment Counter. WEND ' End While lo...

Daniel,

Thanks for the quick reply.
I checked the clock battery between pins 39 & 40 and got only 0.1 volts.
I will add the power jumper usage to my manual.
Thanks for sending a new module, I will let you know how it works.

Things are looking up!

jerry

Daniel, thanks for the help. Your CR-Lf solution works fine. I am still having a problem with the inadc. I cleareand tried both memory banks and in single step it does not get past "x=inadc(28)" it just hangs. I also used 29's instead of 28's with the same results. Also when the board arri...

I am new to the EZSBC1 but have used basic on and off. I want to read the Temp sensor on the Project board and when I enter: pinmode 28, adc x=inadc(28) print x end When run, I get "Start program" , no error message, it just hangs. I have to use the EZSBC1 reset button to exit. I have trie...