SPI setup

SPI setup

Postby speedracer » Wed Nov 30, 2016 11:12 am

I am attempting to control an Analog Devices DDS chip - the AD9835BRU - from an ExSBC1 card using the SPI port. The Basic call you provide to send bytes uses the SPI protocol with CPOL = CPHA = 0. The DDS chip requires CPOL = 0 and CPHA = 1, however. Is there a way to setup the SPI port to use this protocol??


Posts: 7
Joined: Wed Jan 21, 2015 9:56 am

Re: SPI setup

Postby Daniel » Wed Nov 30, 2016 2:17 pm

I will look into it today and let you know by tomorrow.
Posts: 91
Joined: Tue Nov 13, 2012 2:10 pm

Return to EzSBC1

Who is online

Users browsing this forum: No registered users and 1 guest