Controlling your World the Easy Way

Hello, Sorry to revive an old thread, but I'm wondering what your solution was. I'm thinking very strongly about hitting the board with some hot air and removing the regulator and replacing it with an MCP1703, 16V max operating input (the absolute max is 18V). I have a 15V project where I'd prefer n...

One other tip. If you're using I2C, try to get a low current sensor, something no more than in the 20mA range, and try to make it 3V3. Use an IO pin as the Vcc to the sensor. We'll call this the control pin. Don't hook your sensor directly to 3V3. Hook the pull-up resistors for SDA and SCL to this c...

Are you still looking for a good low power setup? Hopefully this will help someone in the future. I've found, with multiple esp32 boards, that pin selection is everything. Some pins, for known reasons, some for unknown reasons, refuse to go into a Hi-Z state when the ESP32 is put into deep sleep. If...