ZIF socket or prototype board for ESP32-01?

Schematics, Example Code and Q&A

ZIF socket or prototype board for ESP32-01?

Postby rick505 » Tue Aug 27, 2019 11:55 am

Folks,

Playing with one of the ESP32-01 boards and although it fits fine in a solderless breadboard it only leaves one row of sockets for attaching wires. Has anyone ever seen any kind of perhaps a DIP ZIF socket large enough for the ESP32-01 module (I soldered the pins to the module). In my delusional world I would like to insert the module into a socket and then break that out to screw terminals since I will be making multiple changes to the overall projust.

Currently I have female headers soldered to a proto board that essentially replicates a breadboard but that still leaves me only one row of available pins that I solder headers. Perhaps simply adding a couple sets of 10 pin screw headers to each side would work. Now off to look for 2.54mm spacing screw terminal blocks for a reasonable price. ;)
rick505
 
Posts: 3
Joined: Mon Aug 26, 2019 2:55 pm

Re: ZIF socket or prototype board for ESP32-01?

Postby rick505 » Fri Sep 06, 2019 4:32 pm

I found what I was needing/wanting at http://www.winford.com/products/dta35.php

I picked up the 40 pin, DTB3540V1-FT, as I did not need the DIN mount and saved a little. Soldered in two rows of female headers and away I went. Ordered and received in just a couple days even with a Monday Holiday.
rick505
 
Posts: 3
Joined: Mon Aug 26, 2019 2:55 pm

Re: ZIF socket or prototype board for ESP32-01?

Postby Daniel » Thu Sep 12, 2019 3:09 pm

This has just got to very high on my To Do list. I won't be able to use a ZIF-socket but I'll make a breakout board with screw terminals. The layout is wider than a 40-pin ZIF-socket. I'll beat the bushes and see what I can dig up.
Daniel
 
Posts: 106
Joined: Tue Nov 13, 2012 5:10 pm


Return to ESP32 Related

Who is online

Users browsing this forum: No registered users and 1 guest