ESP32 on Linux

Schematics, Example Code and Q&A

ESP32 on Linux

Postby richdiggins » Fri Feb 15, 2019 3:43 pm

To use these esp32 boards on Ubuntu 16.04 LTS it is necessary to load a kernel module that assigns the device a serial usb port.

Run the following command;
sudo modprobe cp210x

You can also add the "cp210x" line to the /etc/modules file to allow loading the module at boot.
Posts: 1
Joined: Thu Feb 14, 2019 8:14 pm

Return to ESP32 Related

Who is online

Users browsing this forum: No registered users and 1 guest