Page 1 of 1

Development Environment - Arduino for Windows

Posted: Sat Mar 11, 2017 4:35 pm
by Daniel
See the instructions here https://www.youtube.com/watch?v=DgaKlh081tU

The path for the "Additional Boards Manager URLs" is https://dl.espressif.com/dl/package_esp32_index.json

I use v1.8.x for testing. Versions from around 1.6.10 seem to work properly. YMMV

Daniel

Re: Development Environment - Arduino for Windows

Posted: Fri Mar 09, 2018 2:03 pm
by BAJER
The link is broken.

Re: Development Environment - Arduino for Windows

Posted: Fri Mar 09, 2018 2:13 pm
by BAJER
I am using Arduino IDE 1.8.5 with Windows 10. I can't get the sketch to upload to the ESP32 board.

I have the following selected:
- ESP32 Dev Module
- Upload Speed 921600

The port option is grayed out and I can't select the port to use. When I try to upload, I get:
"Failed to execute script esptool the selected serial port Failed to execute script esptool
does not exist or your board is not connected"

I have the ESP32 board connected with the USB cable, not COM1.
Any suggestions?

Re: Development Environment - Arduino for Windows

Posted: Sat Mar 10, 2018 8:19 am
by iSeries1
Looks like the updated documentation is here: https://github.com/espressif/arduino-es ... windows.md

If the driver for the board does not install there will be no port and you will not be able to upload sketches. Check device manager for proper port number.

Mike