PlatformIO support

Schematics, Example Code and Q&A

PlatformIO support

Postby boneskull » Wed Apr 05, 2017 11:14 pm

I'd like to send a PR into PlatformIO add this as as supported board.

From what I can tell, EzSBC's ESP32 board is very similar to SparkFun's ESP32 Thing. Obviously, there's no JST connector for a battery, but are there any other differences to know about?

I'm using "EzSBC ESP32-01 Breakout and Development Board" as the name and "EZSBC_ESP32_01" as the build flag. The board ID will be "ezsbc32-01". Please let me know if you have a better idea for any of these.

Posts: 2
Joined: Thu Mar 16, 2017 6:46 pm

Re: PlatformIO support

Postby Daniel » Thu Apr 06, 2017 7:07 pm

Thanks a lot. The board id of ezsbc32-01 is perfect.

The board has an RGB LED that is connected to the ESP32. The pin numbers are as follows:
Red LED pin 16
Green LED pin 17
Blue LED pin 18
A low on those pins turns on the appropriate LED.

Posts: 104
Joined: Tue Nov 13, 2012 5:10 pm

Return to ESP32 Related

Who is online

Users browsing this forum: No registered users and 1 guest