Dumb question#1- which pins are which?

angus_grant
Posts: 3
Joined: Tue Nov 19, 2019 4:27 am
Location: Brisbane, Australia
Contact:

Dumb question#1- which pins are which?

Unread post by angus_grant »

I have had a look through the site, product overview, forum, etc and cant find anywhere which sets out which pins are which for the regulators?

My assumption is that as a I look at the component side of the board, Vin left pin, gnd middle pin, and 5V output is on the right.

Correct? Or does it not matter?

Just wanting confirmation as I am based in Brisbane, Australia and don't fancy waiting for more regulators to be shipped out

Thanks,
Angus.
angus_grant
Posts: 3
Joined: Tue Nov 19, 2019 4:27 am
Location: Brisbane, Australia
Contact:

Re: Dumb question#1- which pins are which?

Unread post by angus_grant »

In the spirit of answering your own question, I found one of your regulators on eLab peers, and it has the pins listed

https://www.elabpeers.com/psu2-5-5v-1a- ... m7805.html

Thanks,
Angus.
Post Reply