easyeda pcb design

Schematics, Example Code and Q&A

easyeda pcb design

Postby angus_grant » Tue Nov 19, 2019 7:01 pm

Hi,

I am just wanting to confirm that measurements are in thousands of an inch.

And to save me some work, would you have a template of the ESP32_ANT-01 board I could import straight into easyeda? :-D

I am looking at building a support board with plugs for temp probes, lcd's etc.

Thanks,
Angus.
angus_grant
 
Posts: 3
Joined: Tue Nov 19, 2019 7:27 am
Location: Brisbane, Australia

Re: easyeda pcb design

Postby Daniel » Thu May 14, 2020 2:00 pm

I don't really plan on making boards with additional peripherals on board. I offer a customization service where I provide a custom design based on the boards with whatever circuitry you may need. It is inexpensive and worth it if you need more than ten boards of the new design. By the time you buy a hundred boards the cost is only a couple of dollars extra per board to cover the setup and stencil purchases.

Measurements are in thousands of an inch.
Daniel
 
Posts: 117
Joined: Tue Nov 13, 2012 5:10 pm


Return to ESP32 Related

Who is online

Users browsing this forum: No registered users and 1 guest