Development Environment - Arduino for Windows

Schematics, Example Code and Q&A

Development Environment - Arduino for Windows

Postby Daniel » Sat Mar 11, 2017 7:35 pm

See the instructions here https://www.youtube.com/watch?v=DgaKlh081tU

The path for the "Additional Boards Manager URLs" is https://dl.espressif.com/dl/package_esp32_index.json

I use v1.8.x for testing. Versions from around 1.6.10 seem to work properly. YMMV

Daniel
Last edited by Daniel on Sun Sep 09, 2018 3:52 pm, edited 2 times in total.
Daniel
 
Posts: 98
Joined: Tue Nov 13, 2012 5:10 pm

Re: Development Environment - Arduino for Windows

Postby BAJER » Fri Mar 09, 2018 5:03 pm

The link is broken.
BAJER
 
Posts: 2
Joined: Fri Mar 09, 2018 5:00 pm

Re: Development Environment - Arduino for Windows

Postby BAJER » Fri Mar 09, 2018 5:13 pm

I am using Arduino IDE 1.8.5 with Windows 10. I can't get the sketch to upload to the ESP32 board.

I have the following selected:
- ESP32 Dev Module
- Upload Speed 921600

The port option is grayed out and I can't select the port to use. When I try to upload, I get:
"Failed to execute script esptool the selected serial port Failed to execute script esptool
does not exist or your board is not connected"

I have the ESP32 board connected with the USB cable, not COM1.
Any suggestions?
BAJER
 
Posts: 2
Joined: Fri Mar 09, 2018 5:00 pm

Re: Development Environment - Arduino for Windows

Postby iSeries1 » Sat Mar 10, 2018 11:19 am

Looks like the updated documentation is here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/windows.md

If the driver for the board does not install there will be no port and you will not be able to upload sketches. Check device manager for proper port number.

Mike
iSeries1
 
Posts: 1
Joined: Sat Mar 10, 2018 10:55 am


Return to ESP32 Related

Who is online

Users browsing this forum: No registered users and 2 guests