ESP32 with CH376S USB host

Schematics, Example Code and Q&A

ESP32 with CH376S USB host

Postby Iconnu » Tue Feb 20, 2018 10:36 am

Has anyone tried using the CH376S based usb host with the ESP32 board? Sending a command to check the connection responds with a time out.

I.
Iconnu
 
Posts: 2
Joined: Tue Feb 20, 2018 10:25 am

Re: ESP32 with CH376S USB host

Postby Daniel » Tue Feb 20, 2018 9:45 pm

Can you provide a little more detail? On which port did you send the command?
The ESP32 is not a USB master so you need to send the commands on a serial or SPI port.
Daniel
 
Posts: 97
Joined: Tue Nov 13, 2012 5:10 pm

Re: ESP32 with CH376S USB host

Postby Iconnu » Wed Feb 21, 2018 10:45 am

I ended up figuring out the issue. I was using IO4 and IO2 for RX and TX and this didn't work (not sure why at this point). I switched to IO26 and IO27 and now it works.

I.
Iconnu
 
Posts: 2
Joined: Tue Feb 20, 2018 10:25 am


Return to ESP32 Related

Who is online

Users browsing this forum: No registered users and 1 guest

cron